Yingkou acid and alkali resistant clay professional manufacturer

品名：

耐酸胶泥

规格：

20kg/袋

品牌：

恒众鑫

Yingkou professional acid and alkali resistant cement manufacturer contact manager Ma's phone number
1. ---:r >
Product Overview
This product adds new antioxidants and promotion agents to the original one. A variety of chemical additives such as agents and coagulants greatly improve the quality of the product, greatly improve the refractoriness and flexural strength, and further improve the bonding properties. Easy to hang materials, fast curing, no bubbles, no cracking, and wear resistance. Enhanced usage is wider.
The series of acid and alkali resistant cements do not produce crystalline salts and have high impermeability in various moderate organic acids, especially dilute acids, industrial water, and neutral aqueous solutions.
The series of high-temperature resistant adhesives can be widely used in the masonry, repair and spraying of high-temperature furnaces, furnace walls and other parts of various industrial and civil boilers. It is also widely used in the hot repair of various high-temperature kilns, especially machine coke. Hot repair of unevenness, erosion, cracks, melting and falling bricks in various parts of the furnace carbonization chamber, as well as injection plugging and masonry construction of electric furnaces and smelting furnaces.
2. ---:r >
Technical indicators:
Performance ---:r >
Indicators
---:r >
Spray Replenishing material ---:r >
Applying replenishing material
Appearance and color ---:r >
Thin muddy light green ---:r >
Slurryy light green
Wet bulk density (/)---:r >
---:r >
Refractory degree ℃---:r >
---:r >
/>Flexural strength---:r >
After burning at ℃
After burning at ℃.---:r >
After burning at ℃
3. ---:r >
Usage:
This clay is slightly acidic and should be stirred evenly before use. When repairing the walls of the gunnery furnace, the wall should be blown clean first to make the mud easy to hang. After blowing clean, proceed in the order of spraying and spraying. The spraying surface should be flat and smooth and should not be higher than the wall surface. The mixed cement should be used up within 1 hour. The temperature of the construction site should be between ℃ and ℃. The ambient air humidity should be lower than % before construction. If it is greater than %, exhaust and dehumidification facilities should be installed.
. The mixing ratio of this product and water is to add water to each kilogram (full package) of cement. . When mixing, add water first and then pour the clay. Use an electric mixer to mix the water and clay evenly and let it stand until stirred again before use. . If the weight of the cement mixed at one time is less than kilograms, manual mixing can also be used.
4. Packaging, Storage and Transportation
The packaging specification of this product is ./bag and can be transported as general cargo.
, Store in a dry, ventilated place, avoid sunlight, pay attention to moisture and waterproof, the shelf life is one month.