Supply Zhongpeng interior wall alkali resistant primer

, - Interior wall alkali-resistant primer
, .Product description:
Interior wall alkali-resistant and alkali-resistant primer is developed using new water-based emulsion technology to reduce harmful substance residues, and the product smells fresh and natural. It has good adhesion, anti-mildew and anti-alkali functions, deeply protects the wall, and can effectively improve the adhesion of the topcoat and enhance the effect of the topcoat.
', .Applicable base layer:
New wall plaster base layer, gypsum board base layer, old coating, etc.
', .Main ingredients:
High-quality pigments, fillers, acrylic polymers, additives, water.
', .Construction method:
Roller coating, brushing or spraying.
', .Construction supporting equipment:
Smooth the wall, apply one coat of corresponding sealing primer and two coats of topcoat.
', .Construction precautions:
The wall to be painted must be solid, clean, dry, and the surface is smooth. There are any of the following conditions: the moisture content of the wall is greater than, the value is greater than, the ambient temperature is lower than ℃ and Below, the air humidity is greater than 100%, and it is not suitable to construct dark or brightly colored products when there is heavy fog, strong winds or rain. When constructing dark or brightly colored products, increase the number of coating passes appropriately until you are satisfied with the effect. Before applying colored paint, please confirm that it is correct before proceeding with the major area for construction, and pay attention to avoid construction color difference. After construction, clean the tools with clean water. The surface and environmental conditions of the wall to be painted must comply with the relevant provisions of the "Construction and Acceptance Regulations for Building Painting Projects".
', .Theoretical dosage
: Please refer to the instructions for specific product details. The actual coating area depends on the surface condition and construction method.
' , . Surface dry time:
Touch dry for 3-minutes (℃, relative humidity, wet film thickness in microns) Recoating time is more than 1 hour (drying time will vary with changes in temperature and humidity) .
', .Maintenance time:
days/℃, low temperature (should not be lower than ℃) is appropriately extended to obtain the ideal paint film effect.
', .Safety Instructions:
Paint cans must be tightly closed and placed out of the reach of children. Avoid direct contact with sensitive parts of the skin. Take appropriate protective measures. If it accidentally splashes into your eyes, please immediately Rinse with plenty of water and go to the hospital for treatment. When paint is spilled or leaked, please cover it with sand or soil and sweep it away. Do not pour paint into sewers or drainage pipes. Strictly follow the "Regulations" for construction. Please refer to the relevant product instructions for specific use. .
', .Storage:
Store in a cool, dry and ventilated place. The storage temperature is between -℃ and be strictly protected from frost.
' , .Shelf life:
months