Supply Zhongpeng K11 flexible waterproof coating

型号：

zpf-823

规格：

18kg/桶

Flexible waterproof coating is an emulsion made of silicon, carbon, acrylic waterproof resin and various additives as raw materials. It is polymerized at high temperature using a unique process. It is mixed with special powder when used. It is scientifically formulated and has super strong properties. A new generation of two-component water-based waterproof material with waterproof function.
Product Features
Good water resistance. The waterproof layer will not pulverize, crack or leak after being soaked in water for a long time after drying.
Strong adhesion. After the waterproof layer dries, ceramic tiles can be laid directly on the surface.
Good flexibility can withstand slight vibrations and certain displacements of the building
Water-based materials do not contain harmful substances and are more environmentally friendly, healthier and more secure.
Scope of application
It is especially suitable for moisture-proofing and waterproofing in kitchens, bathrooms, and balconies. It can also be used for moisture-proofing, mildew-proofing, and waterproofing and leak-proofing in other parts of new and old buildings.
Base surface treatment
The base surface should be a solid, smooth, dust-free, and oil-free rough surface
The yin and yang angles should be made into arc shapes. Pipe roots, wall roots, and nodes should be reinforced first. (Non-woven fabric can be added).
Construction ratio
Proportion according to components (liquid materials) components (powder materials) bags.
Pour the liquid into the container first, then slowly pour in the powder, and use a low-speed electric mixer to stir until a uniform mixed slurry without any lumps of dough. If the slurry is too thick or the base surface is too dry, you can add an appropriate amount of water to dilute it when seasoning
Construction method
The base surface must be fully moistened with clean water before construction, but no open water
Will be prepared A good slurry should be directly brushed (roller coated) on the base surface
The brushing should be even, and the bottom should not be exposed, and the coating should not leave blisters
Generally, it needs to be applied twice, and each application should not be Too thick to prevent cracks (especially at pipe roots and corners). Apply the second coat vertically and crosswise after the first coat is dry (usually about two hours apart).
Reference dosage
Apply The total thickness of the layer is generally about ㎜, and the dosage value is about ㎡ (two coats of paint. The actual dosage, number of coats, and thickness depend on the construction site, the roughness of the base surface, and the grade requirements of the waterproofing project.
Storage and transportation
It must be stored sealed in a cool, dry and ventilated warehouse under the conditions of ℃ ~ ℃. The shelf life is one month.
This product is a water-based product and can be transported as regular goods. During transportation, it should be protected from exposure, freezing, Squeeze and collide to keep the integrity of the packaging.
Packaging specifications
/Barrel