RV reducer for four-axis robots

产地：

台湾

型号：

TTRV-50C-31.6

平均使用寿命：

20000小时

Four-axis robot special r reducer Taiwan Murata reducer hollow type roller reducer Taiwan r reducer four-axis robot special reducer hollow type r reducer Taiwan roller reducer roller type r reducer Murata r reducer Murata roller Column reducer for robots. Reducer for four-axis robots. Hollow type. Roller reducer. The hollow part is used to pass through pipelines and is used for the first axis of the robot. It is widely used in four-axis robots, six-axis robots, parallel robots, and rectangular coordinates. Robots and other industrial robots and peripheral equipment.
- . -
.
Lubrication of hollow roller reducer:

In order to give full play to the performance of the reducer:
Hollow roller reducer It is recommended to use grease made by a German company. (Note: Do not mix it with other lubricants.)
The standard lubrication method of Taiwan roller type r reducer is grease lubrication.
The use temperature range of the reducer for four-axis robots (ambient temperature) - ℃ ~ ℃.
Grease dosage in Taiwan roller reducer: The reducer has been injected with the company's recommended high-load multi-purpose long-lasting lubricating grease when it leaves the factory. (Note: The required injection amount shown in the Taiwan Murata roller reducer does not include the space between the installation side. Therefore, please fill it if there is space. In addition, overfilling may increase the internal air pressure, thereby damaging the oil seal, so it is hollow. Please ensure that the space of the type r reducer accounts for about % of the total volume.)
Taiwan's hollow type r reducer is used in special circumstances such as high speed, high temperature, low speed, heavy load, forced lubrication and other special circumstances. Please contact our company for the hollow type r reducer. Negotiate.
Insufficient grease in the robot-specific roller reducer may cause rapid wear and reduced efficiency of the reducer, while excessive grease in the roller reducer may cause oil leakage.
Grease replacement time: Hollow type r reducer grease will deteriorate after a certain period of use. When the Taiwan r reducer is running with an appropriate amount of grease injected, the standard grease replacement time is hours.
When the grease is stained or the Taiwan roller reducer is used in a harsh environment (the ambient temperature is above ℃), the grease should be checked for staining and deterioration at any time and replaced in a timely manner.

Roller type r reducer application cases:
Low backlash and high holding torque roller type r reducer is widely used in: positioners, turning machines, automatic pipe bending equipment, automatic Labeling printing machines, fourth and fifth axes of machine tools, stamping manipulators, robot bottom axes, palletizing robots, handling robots, spider robots, parallel robots, welding robots and auxiliary machines, six-axis robots, etc. are mainly used for rotation Situations where shafts and articulated arms require high-precision positioning and high loads.
Taiwan's roller reducers are divided into five series:

1. One-stage roller reducer series (full roller type)
2. Two-stage roller type reduction Machine r series (planetary gear + roller high holding torque)
3. Special roller reducer series for robotic arms (outline dimensions and performance are more than % similar to Teijin r reducer)
4. Hollow type r Roller reducer series (outline dimensions and performance are more than % similar to Teijin r reducer)
5. Special r reducer series for four-axis robots (for hollow threading application on the first axis of the robot arm)

Robot-specific roller reducer series
(reduction ratio from ~ ratio)
Two-stage roller reducer r series
(reduction ratio from ~ ratio)
Robotic arm Special roller reducer series
(Reduction ratio from ~ ratio)
Special hollow roller reducer series for four-axis robots
(Reduction ratio = roller wheel speed ratio large gear plate speed ratio )
Hollow roller reducer r series
(Reduction ratio from.~ratio)