Year1
- 产地：
- 台湾
- 型号：
- MFT60-S1-L1-5-K-14-50
- 平均使用寿命：
- 20000小时
-
.
Features of bevel gear reducer:
High positioning accuracy: Taiwan spiral bevel gear reducer adopts precision grinding gear tooth surface to smooth and precise tooth profile . The gear box, bracket and overall structural design are made of strong materials to ensure high stability and strict quality control.
Second high torque: The bevel gear reducer uses high-quality tapered bearings to enable the output shaft to withstand greater axial and radial loads. In addition, the gear box and bracket are made of strong materials and have an overall structural design.
Three high starting properties: Due to the balanced characteristics of the spur gear structure and high precision and low inertia moment, it can have high starting properties.
4. Low noise: The precision ground gear tooth surface is highly precise and smooth, making the gear run smoothly and with low noise. Use selected lubricating oil: German-made selected synthetic lubricating oil is used instead of the grease lubrication commonly used in Taiwan spiral bevel gear reducers. Due to its good fluidity, the gears can operate under sufficient oil film protection to reduce noise.
Five low tooth backlash: Under precise processing and strict quality control, the standard tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. The precision tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. Lower backlash can be customized if necessary.
Six easy installation: The connecting plate and input shaft hole size of the bevel gear reducer are designed to be flexible so that the reducer can be combined with servo motors of various brands.
Seven long lifespan and maintenance-free: Precision ground gears are made of high-grade nickel-chromium-molybdenum alloy steel, which is hobbing and deep carburizing and hardening, and then tooth surface grinding to make the gears highly rigid and smooth and wear-resistant. Good sex. The bevel gear reducer uses high-quality German-made synthetic lubricating oil, which has good fluidity and is rich in extreme pressure anti-pressure agents, so that the various parts in the gear box are fully lubricated and protected. The use of Japanese high-quality non-perishable oil seals ensures good sealing performance. Western European famous brand tapered bearings are used to bear the maximum axial and radial load. The above excellent quality synergy makes the spiral bevel gear reducer long-lasting and maintenance-free.
Analysis of structural components of bevel gear reducer:
Gear box: The bevel gear reducer is made of chromium-molybdenum alloy steel and one-piece molding design with high precision, large output torque and high corrosion resistance.
Output shaft: The bevel gear reducer adopts an integrated design to ensure a rigid structure and a large torque output. The surface is treated with electroless nickel and has high anti-rust function.
Input shaft: The modular design can be matched with servo motors of various brands. The surface of the output shaft is dyed black.
Sun gear: The bevel gear reducer is made of nickel-chromium-molybdenum alloy steel tooth surface that has been carburized for high wear resistance and high impact resistance. The tooth profile finishing treatment can improve gear accuracy and reduce noise.
Planetary gear: The spiral bevel gear reducer is made of nickel-chromium-molybdenum alloy steel. The tooth surface is carburized and has high wear resistance and high impact resistance. The tooth profile finishing treatment can improve gear accuracy and reduce noise. The inner hole does not contain The full needle roller of the cage has high wear resistance and high strength.
Spiral bevel gear: Taiwan's bevel gear reducer uses nickel-chromium-molybdenum alloy steel surface carburizing treatment for wear resistance and high impact characteristics.
Ball bearings: Ball bearings are used as the fulcrum of the simply supported beam of the rotating shaft to provide greater support and service life than needle roller bearings.
Connecting flange: Taiwan's bevel gear reducer adopts modular design and is suitable for the assembly of various servo motors. The surface is treated with sandblasting anode or high-grade baking paint technology to improve the anti-oxidation effect.
Steering body: Special processing can ensure the assembly concentricity of the rotating shaft and the verticality of the input shaft. The bevel gear reducer body is designed with aluminum alloy to significantly reduce the weight of the overall structure. The surface is anodized to improve anti-oxidation treatment.
Double bearing design: Increase input stability.
Rotating shaft: The bevel gear reducer is made of nickel-chromium-molybdenum alloy steel.
Input end overall structure: This bevel gear backlash adjustment structure can adjust the assembly backlash of the bearing and bevel gear at the same time. Patent number:.
Spiral bevel gear reducers are used for precise positioning or reciprocating positioning to stably output power to automation equipment with minimal vibration, such as: printing industry, pipe bending equipment, spring machine industry, D inspection equipment, Connected to the ball lead screw transmission mechanism
Taiwan Jusheng reducer: Reducer series Taiwan reducer-series spiral bevel gear reducer-series spiral bevel gear reducer-series reducer-series bevel gears Reducer Series Bevel Gear Reducer Series Seven series of products with complete specifications, economy, precision, ruggedness and selectivity, suitable for servo motors and stepper motors of various brands. The reducer body shell is made of high-strength aluminum alloy, which is smooth, delicate, light and has high strength and strong protection ability. Sealed design lithium-based composite fully synthetic lubricating grease requires no lubrication for life. High torque, no vibration, low return clearance, low noise, long life, convenient installation and high cost performance.
WhatsApp
