Supply of Liaoning small and medium-sized dust collectors, environmentally friendly dust collector equipment, factory flue gas dust control

处理风量：

4200-7300m3/h

过滤风速：

1.1-1.9m/min

过滤面积：

64㎡

Our company has been supplying dust collector equipment to Liaoning Province, Heilongjiang Province and Jilin Province for a long time. The quality assurance of our company can be sent to staff for on-site measurement
< Xianxian Yongsheng Environmental Protection Equipment Co., Ltd. Contact number: (Manager Li)
The dust collector The dust collector adopts the principles of inertial collision, condensation, centrifugal force, etc. Under the power of the induced draft fan, the flue gas falls from a certain height and hits the liquid surface at high speed to form water mist. Most of the particles sink into the water. Under the action of the dust collector splitter, the atomized air flow rises rapidly up the liquid. The droplets further collide and condense to form a water-cement mixture. The water-cement mixture passes through the cyclone impeller and the steam and water are separated, thereby fully achieving its desulfurization, dust removal and dehydration effect.
The small single-machine dust collector in Liaoning Province has the following characteristics:
Drawing lessons from foreign advanced technology and adopting a completely different system from traditional wet dust collectors (impulse type, spray type, atomization type, foam bed type, etc.) Vertical circulating fluidization technology increases the liquid-gas specific surface area, prolongs the reaction time, and greatly improves the desulfurization and dust removal efficiency.
The small dust collector adopts a single cylinder in-ground type, which takes up less floor space, saves space, and is not easily subject to site restrictions and is easy to install.
Using boiler wastewater as the desulfurization and dust removal absorption liquid, the reaction pool water does not discharge, the liquid-to-gas ratio is extremely low, and there are no operating parts. Fully considering the user, zero operating costs and no maintenance work can be achieved. Form a cycle of waste and cure.
Without the use of spray atomization device, there will be no pipe blockage or corrosion problems.
The environmentally friendly dust collector adopts the principle of combining the vertical impeller dehydration device with fluid mechanics to solve the problem of water in the flue gas. The dehydration effect is better and the fan and flue are less susceptible to corrosion.
The use of special materials and special processes solves the problems of anti-corrosion, wear resistance, and high temperature resistance of equipment under high temperature, high humidity, and high corrosion conditions.
, realize the separation of gray water into the pool to facilitate dust cleaning and create conditions for mechanized dust cleaning.
The equipment has small resistance and does not need to replace the original air induction system.
When the equipment operates under negative pressure and the boiler is under normal working conditions, it can be directly installed outdoors without building a house for insulation.
, No need for special personnel to operate the original tube furnace, it can be easily managed by personnel.