Respirator filter material is made of SUS304, SUS316L

『Product Description』 The respirator filter material is made of, and is specially designed and manufactured for the purpose of sterilization during gas exchange in the pharmaceutical and food industries. The gas in the tank is isolated from the outside world through this filter, so that the gas in the tank can be discharged smoothly. Microorganisms and particles outside the tank will not enter the tank. It has the characteristics of high efficiency, energy saving, safety and reliability.
『Design Features』
The filter element is made of hydrophobic polytetrafluoroethylene microporous filter membrane or hydrophobic polyvinylidene fluoride filter membrane (D).
The gas filtration accuracy is .-.% filtration rate for various bacteria and bacteriophages above . Products are designed in various specifications according to ventilation ///.
This filter can be used for overall bubble point detection and online steam sterilization.
, the sterilization temperature is -℃
minutes (maximum temperature ℃)
, indicate the interface type selection when selecting specifications
『Application fields』
Widely used Beer engineering, food engineering, chemical engineering, pharmaceutical engineering, bioengineering and water treatment engineering and other fields.
『Please inform us when ordering』
Parameters such as diameter, temperature, pressure, media filtration accuracy, connection method, material flow rate, etc. will allow us to provide more accurate services.
『Corporate Philosophy』
Market the world with brand, create the future with technology, and win customers with service. Our goal
『General principles for filter selection』
, Inlet and outlet diameter:
In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipeline.
, Nominal pressure:
Determine the pressure level of the filter according to the highest possible pressure in the filter pipeline.
Selection of the number of holes:
The main consideration is that the particle size of the impurities to be intercepted is determined according to the process requirements of the media process. Check the filter specifications in the table below for the particle sizes that wire mesh of various specifications can intercept.