Operating Instructions for MZGL, a professional manufacturer of electrostatic fluid filters.

规格型号：

按用户所需处理量设计

联系方式：

13303801680 （何工

公司网址：

http://www.mzfilter.com

[
Electrodehydration liquid filter
]
, equipment structure description
Tank (stainless steel or carbon steel lining)
Organic membrane filter element assembly
Control System
Equipped with feed pump and backwash pump
[
Electrodeposition liquid filter
]
, product feature description
◆Electroplating liquid filtration equipment is Fully automatic operation mode.
◆The filtration accuracy of the organic membrane is as fine as . micron, which can fully filter out particulate impurities in the plating tank.
◆Automatically empty the filtered plating liquid in the filter tank before backwashing to reduce the loss of bath liquid caused by backwashing.
◆The backwash is equipped with a backwash water pump to completely restore the filter element.
, Product Operation Instructions
There are multiple filter elements inside the filter housing. The dirty liquid is filtered from the outside to the inside. The particulate impurities are trapped on the outer surface of the filter element, and the clean liquid flows from the outlet of the filter. outflow.
As the impurities trapped on the filter element increase, the pressure difference between the inlet and outlet main pipes gradually increases. When the pressure difference reaches a set value, a backwash signal will be issued.
After the backwash signal is sent, the control system will shut down the feed pump, open the drain valve, and drain the electroplating liquid filtered in the filter.
Start the backwash pump and backwash the filter element.
After the backwash is completed, the filter re-enters the normal filtration state and waits for the next backwash signal.
Adopt pressure difference/time control (pressure difference priority).
[
Electrodeposition liquid filter
]
, product application description
This type of filter equipment is currently mainly used in the purification of electroplating liquids. It can also be used for sewage filtration.
During the electroplating process, defective products such as thorns and pitting are often produced in the plated products. The main reasons are the impact caused by the sludge generated by the dissolution of the anode, incomplete pre-treatment of product electroplating, dirt brought into the product and precipitation generated by chemical reactions, etc. In electroless nickel plating, the reaction process inevitably produces nickel particles, which must be removed in time. Moreover, other impurities will be produced after the plating solution is used continuously for a period of time. If not filtered in time, the service life and stability of the plating solution will be seriously affected, causing the The plating is rough. These are all headaches for electroplating manufacturers.
The function of the electroplating solution filter is to circulate and filter the bath liquid to reduce the production of such defective products.
[
Electrical fluid filter
]
, product specifications (the size of the pipe opening can be changed according to the size of the pipe at the user's site)
Inch
Model
Equipment size
(
)
Filtration area
Working pressure
Pressure difference
Filtration precision
Reference processing capacity/






[
Electrodeposition liquid filter
]
, other products related Description
Product packaging The product itself has a steel box. We have customized wooden packaging for it. We will choose a dedicated car or direct transportation method without transfer when consigning the goods.
Production Cycle The production cycle of customized products is generally ~ days.
The service responds to user inquiries at any time, provides free small accessories, simple products guide users through manuals to use more complex products, and guides users on site.
[
Electrodehydration liquid filter
]
We welcome material testing and thank you for your patronage.