Deformation joints Aluminum alloy floor FOM deformation joints Stainless steel cover expansion joints Building deformation joints

Huamao deformed joint floor metal cover type
is composed of an aluminum alloy base, an aluminum alloy (or stainless steel plate, brass plate) center cover plate, and a stainless steel sliding rod. Applicable seam width. The characteristic of the metal cover type is that a stainless steel sliding rod is used to connect the cover and the base fixed on both sides of the deformation joint. During installation, the sliding rod is tilted according to the degree. When the base is displaced, the metal cover always remains in place. The center of the joint can increase the thickness of the cover plate and improve the load-bearing capacity when used on the floor. General load-bearing load. (Forklift passes) The load-bearing type can be determined through consultation based on project requirements.
Note
, ] During construction, the width of the upper opening of the base should be the width of the notch.
, 】is the surface projection width of the deformation joint device, and the width of the deformation joint is designed according to the engineering.
, 】The deformation joint panel can be made of aluminum alloy, brass, and stainless steel.
, ] The biggest advantage of this deformation joint device is that the base layer treatment is simple. As long as the debris in the joint is cleaned and the appearance is kept smooth, there is no need to reserve the joint position in advance. Floor tiles and stones can be laid directly on the joint. The aluminum alloy base is fixed inside the seam, and is directly connected to the cover plate using accessories. The appearance is smooth and unified with the building, which greatly solves the complex and troublesome base treatment during the construction process, saving the manpower, material resources, and financial resources, improved work efficiency and accelerated project progress. The simple construction plan greatly solves various technical problems encountered by workers during the construction process and avoids rework.