Silicone coated metal. Plastic hot vulcanization adhesive

Huaqishi
< r/ />

Product features:
It has good bonding effect on a variety of silicone rubber compound. Including rubber compounds that require or do not require a stage of vulcanization
Single component, single coating, simple process
The bonding parts can withstand water, salt spray, chemicals, grease, oil stains and other harsh environments.
Product performance:
Components: Composed of unique silicon compounds and additives
Color: light yellow liquid
Storage period: Unopened container (℃) months< br/> Usage:
Surface treatment, mechanical method (sand blasting) followed by degreasing, or chemical treatment.
For glue application, apply the vulcanized adhesive evenly on the surface of the metal or plastic substrate by brushing, dipping or spraying.
Drying: Dry at room temperature for at least 10 minutes, or at ℃ for at least 10 minutes. The temperature should not exceed ℃.
Parking: It is advisable to bond as soon as possible after gluing, preferably on the same day. If contamination and exposure to high-humidity air are avoided, it can be parked for no more than a day.
The first-stage vulcanization depends on the vulcanization conditions of the rubber material. The second-stage vulcanization should not exceed ℃. Generally between degrees
Notes:
During the surface treatment of metal or plastic parts, the room should be well ventilated. If it is the first time to use platinum vulcanizing agent to mold silicone, then hot-press vulcanize it for the second time on plastic or metal, and then bake it at an excessive temperature for several minutes for better results

This adhesive contains easy Volatile solvents should be used in a well-ventilated fume hood, and open flames are not allowed in the workplace.

After use, the adhesive bottle cap should be sealed and stored away from light and heat.

Operators should be equipped with masks, gloves and other labor protective equipment.
Packaging specifications:
/barrel, /barrel, /barrel