Huaqishi UV glue shadowless glue. Transparent traceless glue

< r/ Glue/>< r/ Lamp/> [
Product Description
]
It is a one-component UV/visible light curing modified acrylate adhesive with high bonding strength. High transparency, no yellowing, no whitening, and good weather resistance!
It has high viscosity and has high strength for plastic self-adhesion or mutual adhesion and bonding with glass. It is mainly suitable for bonding various plastic materials such as glass and B, and is widely used in toys, crafts, lighting and other industries.
[
Physical and Curing Data
]
Sufficient UV energy radiation is required to cure in an air environment. Mainly UV light.
Irradiation conditions
: High pressure mercury lamp, main wavelength
> < > Appearance

> Colorless or light yellow transparent liquid

< br/> < > Viscosity (/℃
)

>


< > Tack dry time:

>


< > Deep solidification time:

>


< > Accumulated energy

> /


[
Cured product properties
]

Physical properties:
> < > >

> >Conditions

> >


< > >Coefficient of thermal expansion

> >

> > _


< > >

> >

> > _


< > >Hardness (Shao)

> >

> >


< > >Water absorption< br/>
> > r @

> >


< > >Glass transition temperature

> >< br/>
> >


>
>
Intensity data:

> < > Test items

> Test content

> Curing conditions

> Test data


< > Tensile strength

> with

> @ / ,

> /


< > Bonding torsional strength

> /

> @ /
,

>


>
> 【How to use】
>Step one: Clean the surface of the product. If there is water or detergent remaining on the surface after cleaning, it needs to be blown or wiped dry or wait for it to be completely dry before dispensing glue.
>Step 2: Apply glue evenly to the surface of the product that needs to be bonded, fit it, squeeze hard to expel bubbles and make the glue flow level, make sure that the bonding parts are covered with glue and fix the position.
>Step 3: Use a cloth or paper towel to wipe away the excess glue spilled around the product. Try not to expose the glue to UV rays before this step. Do not use a wet cloth or wet paper liquid (such as glass, water, alcohol, acetone and other solvents) to wipe away glue spillage around the product before the glue is completely cured.
>Step 4: Use ultraviolet light with a wavelength of nanometers to irradiate until the glue layer has been fully cured. When irradiating, keep the UV lamp as close to the bonding part as possible to speed up the curing speed.
>Step 5: After ultraviolet irradiation and curing, if there is still glue overflow around the product, you can use a blade to scrape it off.
>【Notes
】
>The ideal adhesive layer thickness when bonding is, too thin or too thick will affect the bonding performance.
>Make sure that the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the bonding performance of the adhesive layer.
>Do not move glass or metal back and forth when exposed to ultraviolet rays, otherwise it will easily cause the glue layer to turn white and reduce the bonding strength.
>Remaining glue cannot be returned to the original packaging. It should be sealed and stored at room temperature away from light and kept out of reach of children.
>This product is slightly irritating to the eyes and skin. If it accidentally splashes into your eyes, please rinse immediately with plenty of water. If in contact with skin, wash with soap. If the situation is serious, please see a doctor. It is recommended that the glue applicator wear professional anti-UV glasses and labor protection gloves.
>[Packaging specifications]
>/gram/stick/bottle/barrel
>[Storage]
>Please store in a dark, sealed, ventilated and cool condition, ideal storage The temperature is in ℃
.
>【Validity Period
】
>Validity Period: Year