EPDM rubber backing treatment adhesive

< r/ />Huaqishi

Rubber back-adhesive treatment adhesive
A product description
The back-adhesive treatment agent is specially used for EPDM rubber and silicone rubber stickers. Surface treatment of surface glue. The double-sided tape can be firmly bonded to EPDM rubber and silicone rubber. This product is widely used for double-sided tape on the backs of EPDM rubber, silicone rubber, foot pads, jewelry, etc. Suitable for a variety of double-sided tapes, such as Nitong, etc.

Two usage methods:

Clean the oil, sewage, impurities, etc. on the surface of EPDM rubber products that need to be bonded.

Apply
to the surface to be bonded to EPDM rubber products, generally apply it once or twice, and let it dry for several minutes at room temperature

.

Bond the pressure-sensitive adhesive paper such as double-sided tape to the rubber product that has been coated with
EPDM rubber, using appropriate force

Press the glue Contact surfaces.

It can be glued together after being left for about an hour, and the practical strength will reach its highest strength after an hour.

Three packaging methods
kg/barrel
/barrel/barrel

Five storage and quality assurance
After the glue application is completed, it must not be used up The glue should be tightened immediately and sealed and stored
Store in a cool and dry place, away from fire sources, and keep out of the reach of children!
~The shelf life is up to months