Year1
<
This product is widely used in coal-fired industrial boilers for dust removal. Smoke, dust removal and desulfurization. It has high purification efficiency for gases with high humidity, high temperature, high concentration and cohesive dust and industrial kiln smoke.
.
<
< Structural features of water-type desulfurization dust collector
.
, This product is mainly composed of air inlet and outlet boxes, sewage outlet tank brackets and other parts.
-.-..
, has the characteristics of novel design, reasonable structure, small footprint, high smoke elimination and dust removal efficiency, significant desulfurization effect, low operating cost, convenient operation and long service life. .
.
<
This product adopts a water-type working principle and a vortex-type structure. First, a certain amount of water is stored in the dust collector and desulfurization agent is added. After the fan is started, the dust-laden airflow enters the dust collector from the inlet and directly impacts the liquid surface. The coarse dust particles collide with the liquid by inertia. After being captured, the air flow passes through the water layer in a thin stream to stimulate a large number of droplets, which are subject to secondary purification. The coarse dust particles are captured by the liquid. Fine dust particles pass through the -r type clean room between the two blades with the air flow. Due to the droplets stirred up by the high-speed air flow hitting the water surface and the centrifugal action, the fine dust particles are collected and At the same time, the -r gas in the flue gas is absorbed by the desulfurization liquid and effectively removed. The purified moist gas is discharged into the atmosphere through the air collection chamber under the action of the fan after the droplets are removed by the water baffle. The purified mud is regularly discharged from the discharge butterfly valve of the funnel -r
(
Discharged once every -r
depends on the situation -r
)
. New water is replenished from the water supply pipeline. The water level in the dust collector should be kept level with the overflow pipe. The height of the overflow pipe should be adjusted to the point where the fan does not carry water and the furnace pressure is not positive. At the same time, a desulfurizer should be added to the water supply tank to ensure better desulfurization efficiency. . The discharged gray water can be neutralized in the sedimentation tank and then discharged or recycled.
WhatsApp
