LCBT series side-inserted side-spray pulse flat bag dust collector

B-type series side-inserted side-spraying pulse flat bag dust collector
Unit product overview:
B-type series side-inserted side-spraying pulse flat bag dust collector unit is our factory’s summary of domestic Based on the technology of various types of dust collector units, it combines the advantages of the chamber backflush cleaning structure and low-pressure pulse high-efficiency dust cleaning technology, and overcomes the shortcomings of weak backflush cleaning intensity in chambers and many wearing parts of high-voltage pulses, and is developed Another new system product successfully developed.
This series of dust collectors is a combined unit with a built-in fan and a controller with a filter bag plug-in structure. It has a compact structure and can be installed indoors or outdoors. It has a wide range of applications and is mainly used in metallurgy in the building materials industry. Dust purification and material recovery in foundry grain processing and mining enterprises.
The working principle of the Type II B series side-inserted side-injection pulse flat bag dust collector unit:
The dust-containing gas is inserted obliquely into the middle box from the upper air inlet. Through inertial collision, the coarser dust particles are ejected by the self-gravity. Under the influence, the dust will directly settle into the ash hopper, and the dust will be discharged from the ash outlet through the ash discharge mechanism. The other part of the finer dust is adsorbed on the outer surface of the filter bag under the action of the fan. The clean gas passes through the filter bag and enters the clean air box of the middle box. It flows through the rectangular induction tube, collects in the air outlet box, and is discharged from the fan outlet. As the filtration conditions continue, the resistance of the bag dust collector should be maintained within a limited range (<), so dust cleaning must be performed to shake off the dust and reduce the equipment resistance. The dust collector of this system uses a pulse controller to regularly control a low-pressure pulse valve to blow and clean dust, causing the filter bag to bulge instantly under the action of its blowing and induced air volume, shaking off the dust.
Botou Sanrong Environmental Protection Machinery Co., Ltd.
Contact: Wang Fengfeng
Mobile:
Telephone:
Fax:
Address: Botou, Hebei Province Siying Industrial Zone
Website:< />: