Pulse bag dust collector

Pulse bag dust collector
The working principle of pulse bag dust collector: Dust-containing gas enters the filter chamber from the ash hopper (or the wide open flange at the bottom), and the coarser particles fall directly into the ash hopper or In the ash bin, the dust gas is filtered by the filter bag, and the dust is retained on the surface of the filter bag. The clean air passes through the bag mouth to the clean air chamber and is discharged into the atmosphere by the fan. When the dust on the surface of the filter bag continues to increase
Pulse bag dust collector Working principle: dusty gas enters the filter chamber from the ash hopper (or the wide open flange at the lower part), and the coarser particles fall directly into the ash hopper or silo. The dust gas is filtered by the filter bag, and the dust is retained on the surface of the filter bag. The clean air passes through the bag mouth to the clean air chamber and is discharged into the atmosphere by the fan. When the dust on the surface of the filter bag continues to increase, causing the equipment resistance to rise to the set value, the time relay (or micro-differential pressure controller) outputs a signal, and the programmable controller starts Working, open the pulse valve one by one, so that the compressed air blows through the nozzle to clean the filter bag, causing the filter bag to suddenly expand. Under the action of the reverse air flow, the dust attached to the surface of the filter bag quickly breaks away from the filter bag and falls into the ash hopper. (or ash bin), the dust is discharged from the ash discharge valve. After all the filter bags are blown and cleaned, the dust collector resumes normal operation.
Features and uses of pulse bag dust collector:
Because this dust collector adopts pulse injection dust cleaning method. It has the advantages of good dust cleaning effect, high purification efficiency, large air volume, long service life of the filter bag, small maintenance workload, safe and reliable operation, and is widely used for dust removal and purification of non-fibrous industrial dust in various industrial and mining enterprises such as metallurgy, building materials, machinery, chemicals, and mining.
Pulse bag dust collectors have one specification. Each specification can be divided into standard type with ash hopper and open flange type (without ash hopper) type B. Its structure is mainly composed of filter bag in the filter chamber to clean the air. It is composed of the chamber ash hopper unloading valve, pulse injection device, electric control box, etc. The box body is all made of welded structure, and the access door is sealed with foam rubber strips to ensure that the dust collector is tight and does not leak.
Technical Performance of Type II Pulse Bag Dust Collector
Model Specifications Filter Area Dust Concentration/Filtration Wind Speed/Filtration Air Volume/Resistance Efficiency% Overall Dimensions Length, Width, and Weight
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Ⅱ ＜
Botou Sanrong Environmental Protection Machinery Co., Ltd.
Contact: Wang Fengfeng
Mobile:
Telephone:
Fax:
Address: Siying Industrial Zone, Botou City, Hebei Province
Website: :