Xinxiang Supply-HLYC-32A portable oil filter

& Oil Filter_Copy&C Portable Oil Filter is a filtration product independently researched, developed and produced by our factory. It is suitable for oil purification and filling of new oil in hydraulic systems, lubrication systems and static pressure systems in various industries. , can also be used for low pressure system cleaning. It is especially used for filtering and filling oil in hydraulic stations in power plants and steel plants. This model adopts two-stage gradient high-precision filtration, the filtration precision can reach &, at the same time, the precision filter element has a large dirt holding capacity and a long service life. Shanghai Gaodong gear pump motor unit has reliable quality, safety and durability. It adopts imported water-absorbing filter material, which can absorb the trace water in the oil. 1. Technical parameters:
&Rated flow:/
&Rated pressure:.
&Filter accuracy:
&Motor power:.
&Rated voltage:
2. Precautions:
Connect the three-phase power supply, press the green start button, and see if the steering rotates clockwise. If it rotates counterclockwise, please turn the three-phase power cord around. Make sure the motor is running in the forward direction.
.Connect the inlet and outlet oil pipes to the inlet and outlet ports, open the inlet and outlet ball valves, and check whether there is leakage in the connecting oil pipes and whether the connection is reliable.
.Press the green start button to start the oil filter.
. Please press the red button to stop the machine. Please remove the power cord when not in use.
.When the pressure behind the pump is greater than ., please pay attention to replace the fine filter element.
The filter element of the oil suction primary filter can be cleaned and reused. When cleaning, soak in gasoline or kerosene and scrub with a brush.
After cleaning and replacing the filter element, please pay attention to connect the filter upper cover to prevent oil leakage.