Introduction to the dust cleaning system of pulse bag dust collector

The pulse dust collector produced by Sanrong Environmental Protection is a bag dust collector that uses pulse cleaning. The dust cleaning system of the bag dust collector consists of several parts such as a pulse valve, a blow pipe, an air bag, and a pulse controller. The chamber dust collector also has a cylinder flushing valve. One end is connected to the compression package and the other end is connected to the blow pipe flush valve back pressure chamber, connected to the control valve flush valve back pressure chamber, connected to the control valve flush controller. The controller controls the opening of the control valve and pulse valve. When the controller has no signal output, the exhaust port of the control valve is blocked. The nozzle of the flushing valve is closed. When the controller sends a signal, the exhaust port of the control valve is opened. The flushing valve backpressures the gas outside the room. Remove the pressure reducing plate and create a pressure difference on both sides. The plate is displaced due to the pressure difference. The magnetic pulse valve blows open. The compressed air passes from the air bag through the pulse valve and ejects high-speed airflow through the small hole of the blow pipe. The surrounding air, which is several times the primary wind, is induced by the venturi tube inducer to enter the filter bag and form a positive pressure within the filter bag for instant pulse cleaning< br/>Our company also mainly produces products such as bag dust collectors, bag dust collectors, dust collectors, pulse bag dust collectors, pulse bag dust collectors, dust removal bags, dust removal skeletons, etc.
Contact number Welcome to call