Transfer of fresh milk bar equipment

样式：

各种

规格：

符合

材质：

不锈钢

Tank operation instructions
Turn on the power supply. When the water level in the mezzanine of the tank is low, the water valve indicator light comes on. The water valve starts working. When the water level reaches a high level, the water valve closes.
When the high liquid level indicator light turns on, the electric heating switch is turned on. Heating position ring pump and electric heating work at the same time
When the temperature of the material needs to be set, set the upper limit of the temperature control instrument to ℃. When the material is heated to ℃, the temperature indicator light will light up. The heating and circulating pump are in The time delay stop setting on the time relay is generally set to minutes
Ensure that the temperature during the holding time is around degrees. The setting on the time relay is generally set to seconds
In order to prevent the electric heating and circulation pump from frequently operating under heat preservation The start-up relay can set the time according to the falling temperature of the material. During the heat preservation process, the material will cool down. The temperature of the material will be maintained according to the minimum temperature to the maximum temperature of the heat preservation. The time is generally set in minutes. When the material reaches the heat preservation time, the water valve Automatically turn on the water inlet and start cooling. When the temperature of the material drops to 10 degrees, the buzzer starts to alarm. When you turn the heating switch to the drainage position to start draining water
After the production is completed, please pay attention to turn off the power switch on the panel