CRI-200 common rail injector test bench

长：

1300

The test bench is a special equipment for testing the performance of high-pressure common rail injector assembly. It uses the original high-pressure common rail pump to generate rail pressure to test the injector. The oil volume observation using the measuring cylinder is simple and stable.
>
Teidian

>The main engine drive adopts frequency conversion speed regulation computer control
>Uses the original high-pressure common rail oil pump to generate rail pressure
>The driving signal can Adjust
>Short-circuit protection function
>Real-time measurement of rail pressure and high-pressure protection function
>Adjustable pulse width and frequency of the injector drive signal
>Injector injection time or The number of injections can be set freely.
>
Function
Performance

>Measure the maximum oil volume of the common rail injector (rated operating condition)
>Measure the common rail injector Minimum oil quantity (idle speed condition)
>Measure the average oil quantity of the common rail injector (medium speed condition)
>Measure the return oil quantity of the common rail injector
>The injection state and oil quantity measurement of the high-pressure common rail injector can be freely set
> >Atomization test can be performed to observe the atomization effect of the injector and determine whether the nozzle hole is clogged
>Can be cleaned Common rail injectors repair injector failures caused by contamination.
> >
Technical parameters
> >Pulse width
>Number of consecutive injections
>Fuel temperature ℃
>Rail pressure
> Test oil filtration accuracy
>Input power supply is three-phase or three-phase
>Test bench speed rpm
>Fuel tank volume
>Dimensions
>Weight.