Epoxy anti-static floor system

Epoxy anti-static floor system

Scope of application

Oxygen anti-static floor paint is suitable for communications, electronics, microelectronics, computers, precision instruments, textiles, printing, powder It can be used for walls, floors and oil storage tanks of all factories that require anti-static, such as liquids, chemicals, organic solvents, gas, etc.

Product Features
Can quickly leak static charges
Excellent and long-lasting antistatic, not affected by time, temperature, humidity, etc.
Strong adhesion and excellent wear resistance
br/> Resistant to oil stains and general chemical corrosion
Dust-proof, moisture-proof, smooth and smooth
Floor thickness is about
Workmanship

Ground treatment should be polished according to the ground conditions , repair, decontamination, dust removal.

The epoxy anti-static floor primer is rolled with an anti-static primer with extremely strong permeability and adhesion to enhance surface adhesion.
Copper Foil Laying Use conductive copper foil to lay a complete line.
Anti-static mortar Add the anti-static component to the quartz sand, and use a trowel to evenly coat it in multiple passes.
Anti-static putty uses an anti-static component, add an appropriate amount of putty powder, and use a trowel to evenly apply it in multiple passes.

Anti-static topcoat should be applied with anti-static topcoat by roller or anti-static self-leveling coating.

The time when the epoxy anti-static floor paint is put into use shall be subject to
. People can only use it after
hours, and heavy pressure can only be applied after
hours.
Precautions
Avoid construction under low temperature and high humidity conditions
After mixing the two-component materials,
should be applied within a short time
After the painting is completed, it should be fully It can be put into use only after maintenance. The coating thickness should be determined according to the flatness of the substrate and usage requirements. The worse the flatness of the ground, the thicker the coating system should be used. The greater the coating load, the thicker the coating should be. If the coating is too thin, it will be easily damaged during use. For example, the ground on the first floor needs to be waterproofed.