Plate and frame filter, stainless steel plate and frame filter, stainless steel plate and frame filter press

, This product is widely used in pharmaceutical, biochemical, food and beverage, water treatment, brewing, petroleum, electronic chemicals, electroplating, printing and dyeing, environmental protection and other industries. It is the latest equipment for filtering, clarifying and purifying various types of liquids. .
, The whole machine is made of high-quality stainless steel materials, which are corrosion-resistant and durable.
, the filter plate adopts a threaded structure, and different filter materials can be replaced according to the requirements of different filter media and production processes (primary filtration, semi-fine filtration, fine filtration). Direct use of microporous filtration can achieve sterile filtration. According to the purpose, the user can also reduce or increase the number of filter layers according to the size of the filtration volume to make it suitable for production needs.
, All sealing parts of this product are made of silicone rubber sealing rings, which are high temperature resistant, non-toxic, non-leakage and have good sealing performance. We can also customize a multi-stage filtration device according to customer needs. The first stage can hold coarser filter materials, and the second stage can hold turbid filter materials, which not only saves time but also improves the filtration accuracy. It is also equipped with a backflow device. The filter material is extremely easy to clean. After the pump stops rotating, open the backflow valve, and all the sediment will automatically flow back out. At the same time, you only need to use clean water to backwash from the backflow, and it will be clear and clean.
, Instructions for use of stainless steel plate and frame filter:
, When using, rinse repeatedly with sodium bicarbonate solution, then rinse with water, and then use water for injection Disinfection, the measured value
' '
reaches the permitted range.
, Check whether the silica gel of the filter is placed flat to prevent water leakage. You can moisten the thin filter material with distilled water and stick it to the mesh surface. The filter plate is placed in the silica gel ring and pressed Tight top plate.
, When starting the infusion pump, first close the inlet valve, then start, gradually open the ball valve to the required pressure, and discharge the air to filter. Generally, the pressure does not exceed
' '
.
, When using, you should pay attention to the increase and sudden drop of the pressure gauge to determine whether the filter material is blocked or broken.
, When stopping the pump, you should first close the liquid inlet valve to prevent the liquid from suddenly stopping the pump from backflowing and damaging the filter material. Then, stop the pump and unscrew the vent bolt, and loosen the top plate to replace the filter material and clean it.
,
, Stainless steel infusion pump:
, 1. Application: The stainless steel
infusion pump produced by our company can be widely used in medicine, catering, chemical industry and other industries. This infusion pump is especially an ideal equipment for pharmaceutical factories and hospital pharmacies to transport liquids.
, 2. Structure: The pump is made of high-quality stainless steel ' '
and
' '
and is manufactured with precision processing. The pump adopts a mechanical seal ring, and the sealing material is non-toxic, odorless and acid-resistant silicone rubber. The whole machine not only has corrosion resistance, but also has a reasonable structure. It is easy to disassemble and assemble, and can be cleaned and damaged parts replaced at any time.
, Things to do with the new pump:
, ( ' '
), first scrub with
' '3~
sodium carbonate solution.
, ( ' '
), rinse with water until there is no alkali reaction, and then wash with water for injection.
, ( ' '
) When starting, pay attention to the motor rotation direction complying with the requirements on the signboard, and the idling should not exceed
' '
minutes.