Jiangsu, Zhejiang and Shanghai magnesium alloy degreasing agent

包装：

桶装

规格：

25kg/桶

Process features:
Remove the oxide film, oil film and impurities on the surface of the workpiece to form a uniform and clean magnesium alloy surface, which is conducive to the formation of good bonding force in subsequent processes.
Does not corrode the magnesium alloy matrix.
Suitable for pre-treatment of magnesium alloy spraying or electroplating.

Plating bath composition and operating conditions:
Raw materials and operations
Standard cylinder volume
Range
Jiangsu, Zhejiang and Shanghai magnesium alloy degreasing agent
ml /L
-mL/L
Jiangsu, Zhejiang and Shanghai magnesium alloy degreasing agent
mL/L
-mL/L



Temperature
℃
Room temperature -℃
Time
Minutes
-minutes

3
Plating solution preparation method:
When opening the cylinder, add 3/3 water of the prepared solution into the tank.
Add the required amount of magnesium alloy degreaser and stir to dissolve.
Add pure water to required volume.

Equipment requirements
Project
Requirements
Tank body
, or high-density
hanger
, or type 3 stainless steel. Ensure that the workpiece is vertical in the bath, and the minimum distance between two adjacent plates is
Air agitation
The main and auxiliary tanks should have moderate and uniform air agitation
Circulation
3- per hour cycle
Adding system needs
The material of the feeding pump is, or, strong alkali resistant
Filtration system
Continuous cycle filtration, using filter cotton core or filter bag
Exhaust ventilation
required
Heating system
required