Year1
- 外形尺寸：
- 265*220*270mm
- 重量：
- 50kg
- 功率：
- 2.2kw
:
Step 1: Connect the power supply
Before use, use the above independent socket or circuit breaker or guillotine switch to connect the machine power supply, and make the machine reliable Ground.
Step 2: Inspection
Before starting, check whether the bolts in various parts are loose. If they are tightened, power on the motor again. After powering on, let it idle for a few minutes. Only after everything is correct can it be put into production.
Step 3: Mix the noodles
Either by hand or with a dough mixer
(
The salt of
3-
should be added to the water
)< br/>It should not be too hard or too soft. The degree of wetness
)
can be controlled flexibly, and it can be used in about a few minutes after mixing the noodles.
Step 4: Feeding
Cut the dough into strips
(
It can be put into the hopper and rolled into the dough barrel by the dough feeding roller without being overhead. The length is not limited
)
, the feeding cannot be interrupted, the cut noodles will fly out of the plate immediately
(
The initial cut noodles are thin and broken, and can be re-added
)
.
Step 5: Adjust
Adjust the width: adjust the double nuts outside the split plate
(
Note: the double nuts must be tightened after adjustment
)
. Adjust the thickness: Use a wrench to adjust the adjustment screw in the thickness hole. If it is positive, it will be thin, if it is negative, it will be thick.
Step 6: Cleaning
How to disassemble and clean the machine head
:
Loosen the double nuts of the vertical shaft and pull out the shaved outer disk
(
Integrated with the spiral
)
, just load them in sequence after cleaning
Please pay attention during use
:
Do not interrupt the two pieces of dough when feeding into the hopper. To ensure the normal operation of the machine, otherwise the cut noodles will be unqualified. At the same time, it is strictly forbidden to put your hands into the noodle hopper or use other objects to press the fabric in the noodle hopper to avoid accidents.
b
The transmission gearbox should be filled with lubricating oil regularly. The transmission gearbox is a fully sealed structure. Non-professionals are not allowed to open it. If the bearings of parts are worn, please ask professionals or return them to the factory for repair.
Regularly check whether the bolts of various parts of the machine are loose.
It is strictly prohibited to start with load.
Product features:
): Unique non-stick property, absolutely non-stick noodles, so the noodles are smooth and plump.
): After each work is completed, cleaning the remaining surface saves more time than the ordinary machine
.
): Acid and alkali salts do not cause any corrosion to the surface.
): Comply with food hygiene standards and fully meet
regulations.
): Horizontal structure, stable and reliable operation, overcoming the shortcomings of vertical noodle cutting machines such as large vibration and unsafety.
Product Parameters
:
Model
Type
Power
Production
Bars
/>Seconds
Dimensions
**
Net weight
WhatsApp
