What precautions should be taken when using Zhejiang Ruian Tongfeng centrifugal oil filter?

-When using Tongfeng centrifugal oil filter, you should pay attention to the following matters:

. -Fix the machine's anchor screws and determine the rotation direction of the host before starting the machine.
. - Turn on the power switch and the machine starts to work.
. Pour the crude oil into the funnel.
. - Put the oil catch basin in place.
. This centrifugal oil filter is equipped with a braking device. When the power is disconnected, the drum cannot be stopped while rotating. It is necessary to adjust the brake lever to brake slowly, otherwise the oil will not flow back.
. When cleaning the oil residue, first remove and take out the three bolts on the upper cover of the outer barrel, lift up the upper cover, then remove the three bolts on the upper cover of the inner barrel, lift off the cover, and use a shovel to clean the oil on the inner wall of the barrel. Scum.
. After a period of time, remove the oil-distributing nylon plate bolt in the center of the inner barrel and then pull the mouth of the inner barrel upwards. After the inner barrel is lifted out, clean the overflowing fine residue at the inner bottom of the outer barrel, and then install the inner barrel.
. Pay special attention to the fact that after cleaning the oil residue, you must cover the inner and outer barrel covers and tighten the bolts, otherwise the machine cannot be started.