How to perform filter maintenance

How to maintain the filter?
①. Coarse filter
The core part of the filter is the filter element. The filter element is composed of the filter frame and stainless steel wire mesh. The stainless steel wire mesh is a vulnerable part and needs special protection
. When the filter has been working for a period of time, a certain amount of impurities have precipitated in the filter core. At this time, the pressure drop increases and the flow rate will decrease. The impurities in the filter core need to be removed in time
. When cleaning impurities, pay special attention to the stainless steel on the filter core. The steel wire mesh cannot be deformed or damaged, otherwise the purity of the filtered medium after being installed on the filter will not meet the design requirements. Compressors, pumps, instruments and other equipment will be damaged
. If the stainless steel wire mesh is found to be deformed or damaged, you must immediately replace.
②. Precision filter
The core part of the precision filter is the filter element. The filter element is made of special materials and is a wearable part that needs special protection
. When the precision filter has been working for a period of time The filter element traps a certain amount of impurities. When the pressure drop increases, the flow rate will decrease. The impurities in the filter must be removed in time and the filter element must be cleaned. When removing impurities, special attention should be paid to the precision filter element not to be deformed or damaged, otherwise it will not be damaged again. The purity of the installed filter element cannot meet the design requirements
Some precision filter elements cannot be reused many times, such as bag filters, polypropylene filter elements, etc.
If the filter element is found to be deformed or damaged, you must immediately replace.
Sales hotline:
Technical support:
Mobile phone:
Address: Wangyuan Building, No. West Fourth Ring South Road, Fengtai District, Beijing