Special bag dust collector equipment for grain and feed mill processing can be designed by on-site measurement engineers

处理风量：

34200-45600m3/h

过滤风速：

0.5-2.0m/min

过滤面积：

380㎡

Our company is more professional in the selection of bag dust collectors in grain feed mills and has many practical experience in the same industry. If you need design and customization, please call our company *Contact number: (Manager Li) - In fact, strictly speaking, compared to bag pulse dust collectors The selection of the device is wrong. A bag dust removal system is configured from an independent system containing multiple technologies and must be individually designed for different dusts, different processing volumes, and different process environments. Directly choose the model corresponding to the air handling volume or bid based on the weight and tonnage of the dust collector. Blind selection often leads to various failures during the application process of dust removal equipment.
There is a common misunderstanding among the dust removal equipment manufacturing industry and users that dust removal equipment is not considered the main equipment. The purpose of installing dust removal equipment is only to passively meet environmental protection requirements. But in fact, in the production of more grain and feed factories, dust removal equipment is indeed the main product production and processing equipment. The efficiency of dust removal equipment in these production processes will directly affect the production output of the enterprise. The main function of these dust removal equipment is the graded recovery of dust in key processes.
At present, debugging and maintenance problems are particularly prominent in the grain and feed industry. To solve this problem, we must first correct the misunderstanding that dust removal equipment is not the main equipment and improve the dust removal system operating regulations. Secondly, carefully read the instruction manual of each dust collector and master some necessary knowledge of dust removal mechanisms and principles.
The dust cleaning system of the bag pulse dust collector is an independent unit that operates under automatic control and does not require manual cleaning after debugging. When the dust bag accumulates dust, you should check the time, intensity, shutdown sequence and other related factors of blowing and cleaning. Manual cleaning through the access door is an extremely wrong approach. This approach not only fails to solve the problem, but also creates new problems such as damage to the filter bag, deformation of the frame, and failure of the filter bag seal. This will affect the effective operation of the entire dust collection system and reduce the service life of the dust collector.