Furniture factory burning blue charcoal boiler dust collector equipment wood factory pulse bag dust collector

处理风量：

4500m3/h

过滤风速：

0.15m/min

过滤面积：

21.5㎡

Welcome
Xianxian Yongsheng Environmental Protection Equipment Co., Ltd.
Dust removal equipment
Woodenware Factory Bag Dust Collector When the dust-containing gas enters the cyclone dust collector from the tangential air inlet, the air flow changes from linear motion to circular motion. Most of the rotating air flow spirals downward along the inner wall of the bag dust collector toward the cone. The body flow is usually called external swirling airflow. The dust-containing gas generates centrifugal force during the rotation process, which throws the dust particles with a relative density greater than the gas toward the wall of the dust collector. Once the dust particles come into contact with the wall of the dust collector, they lose radial inertial force and fall along the wall by downward momentum and gravity, and enter the dust discharge pipe. When the rotating and descending external swirling airflow reaches the cone, it moves closer to the center of the dust collector due to the contraction of the cone. According to the principle of constant torque, the tangential speed continues to increase, and the centrifugal force on the dust particles also continues to strengthen. When the airflow reaches a certain position at the lower end of the cone, it reverses from bottom to top in the same direction of rotation from the middle of the dust collector, and continues its spiral motion to form an internal swirling airflow. , the purified gas is discharged through the exhaust pipe, and a small part of the dust particles that are not captured are also discharged.
The composition and internal air flow of the cyclone dust collector
Another small part of the gas flowing into the air inlet pipe flows toward the top cover of the dust collector, and then flows downward along the outside of the exhaust pipe. When it reaches the lower end of the exhaust pipe, it reverses upward and is discharged from the exhaust pipe together with the rising internal swirling airflow. Dust particles dispersed in this part of the airflow are also taken away.
The cyclone dust collector uses the principle of centrifugal force to separate dust. Under the action of the fan, the dust-containing gas passes through the dust collection pipe and enters the cyclone dust collector. The dust-containing gas moves spirally in the cyclone dust collector, and the dust is separated from the gas under the action of centrifugal force. The gas is discharged from the cyclone dust collector, and the dust remains in the pulse dust collector and is discharged from the dust collector through the ash discharge port. The cyclone dust collector has a simple structure, low investment, small footprint and easy maintenance. Cyclone dust collector collects dust with high density and large particles. Suitable for solid wood furniture factories.