C-shaped steel equipment C-shaped steel forming equipment C-shaped steel machine manufacturer C-shaped steel machine parameters

{} Profile steel flying saw cutting machinebr/> )
1. Technical information related to profile steel machine
, equipment overall dimensions**
, high forming area
, pressing thickness
/> , forming speed/
, equipment weight in tons
, host power
, hydraulic cylinder power
, hydraulic station pressure
, number of forming rows
, shaft diameter
, shaft made of bearing steel
, chain. inch chain
, large frame steel
, middle plate thickness
, electric control box
> 2. Fixing method of tile press
Color steel tile equipment also needs to be fixed. If it cannot be fixed well, it will lead to deviations in the production process. If deviations occur, the quality of the products produced will also be bad. not qualified. Therefore, the fixation of color steel tile equipment is crucial.
The main purpose of the color steel tile equipment is to fix the upper shaft and upper roller, which will reduce problems during the production process to a certain extent, but if you want to fix the equipment, it is still far from enough. The lower shaft and lower roller must also be fixed so that the connecting plate and the bearing seat can be better connected. If these basic components cannot be stabilized, it will be impossible to stabilize a complete machine. If these parts are stable and proper, then you also need to pay attention to the fact that the plate must try to avoid empty bends during the forming process, which is likely to cause deformation of the product.
Finally, I would like to remind you that after following the above points, you should also pay attention to the overall symmetry and accuracy of the equipment. If the machine is found to be asymmetrical after stabilization, it is not allowed. This may also affect production. Only when everything is considered thoroughly can it be possible to use the machine to produce qualified products