Year1
- 型号：
- 6313
- 规格：
- 1KG/瓶
- 包装：
- 12瓶/箱
1. Product Features
. The fixing speed is fast and the highest bonding strength can be reached in ~ seconds.
. High adhesion and bonding strength, able to maintain long-term bonding.
. Has good flexibility and high elongation.
. Excellent aging resistance, no yellowing or whitening for a long time.
. Good moisture resistance and long-term waterproofing.
. Comply with RH and halogen-free environmental protection specifications.
2. Product parameters
Product model & bonding material & appearance & viscosity
., ℃ & curing energy
/& bonding strength
& hardness
> &Elongation
%&Temperature range
℃
General glass/plastic & colorless and transparent&~&&D&&~+
&Glass/&colorless and transparent&~&&D&& ~+
&General glass/plastic&viscous and transparent&~&&&&~+
&Glass/, light yellow and transparent&~&&D&&~+
&Glass/, &viscous and transparent&~ &&D&&~+
3. Applicable objects of the product
This series of products is mainly used for bonding between glass and plastic. After the glue is cured, it has good flexibility, excellent extensibility and shock resistance. There will be no shrinkage or blooming during the process. After high and low temperature cycle testing, no degumming or cracking will occur. It is mainly used for glass substrate lamination, electronic parts bonding, and handicraft decoration. Typical adhered plastic materials include:,,B,,,,etc.
4. How to use the product
. Clean the surface of the adhered material. If there is any detergent residue on the surface of the material after cleaning, please blow it off. After drying or wiping it dry, apply glue when completely dry.
. Apply glue evenly on one side of the plastic surface, place the other side of the plastic gently on the glue-coated area to fit it, squeeze it hard to expel the air bubbles, and distribute the glue evenly, making sure that the bonding parts are all Covered with glue (the ideal thickness of the glue layer is .~.), the position is finally fixed.
. Use a cloth or paper towel to wipe away the excess glue that has spilled around the plastic (do not use water, alcohol and other solvents to scrub). Do not let the glue come into contact with UV light before this step.
. Irradiate with a UV lamp with the main emission wavelength until the glue layer is fully cured (the irradiation time depends on the type, power, irradiation distance of the UV lamp and the UV transmittance of the plastic, etc.).
. After curing by UV irradiation, if there is still glue overflow around the plastic, you can use a blade to scrape it off.
5. Packaging and Storage
. Packaging specifications include grams/bottle, grams/bottle, and kilogram/bottle. Please contact us for special packaging specifications.
. Store in a cool and ventilated place away from light (ideal storage temperature ~ ℃) and sealed. The validity period is one year.
. Please see the instructions for other precautions.
WhatsApp
