Year1
- 型号：
- TN6350
- 规格：
- 1KG/瓶
- 包装：
- 12瓶/箱
Light-cured glue
Product manual
1. Performance and use
This product is a single-component transparent and strong Since the adhesive contains UV photosensitizer, it can be quickly cured and formed when exposed to UV light at room temperature. After curing, the product does not discolor, foam, or fog, and has good weather resistance and flexibility. , good fluidity and exhaustability, especially suitable for bonding between glass and glass, glass and crystal, glass and ceramics, etc. It can be produced in large quantities and improve production efficiency. It is an ideal choice for the modern furniture industry and tourism handicrafts. Rigid, fast-curing adhesive essential for manufacturing and other industries.
2. Technical indicators
Project technical indicators
Before curing:
Appearance colorless or light yellow transparent liquid
Viscosity ℃m.~
Small smell< br/> Refractive index.
After curing:
Shear strength (glass/glass)
Bonding torsional strength
Applicable temperature range/℃～
Remarks: Curing The physical performance index is based on the lamp and the lamp distance m, curing m, and testing after placing m indoors.
3. How to use
The bonded surface should be free of dirt and oil stains. Solvents such as absolute ethanol can be used to clean the bonded surface.
Apply glue on the bonded surface, and determine the amount of glue applied as needed. Generally, the thickness of the glue layer is .~m. After applying the glue, close it up for bonding. Surface, squeeze hard to make the glue layer evenly distributed and eliminate air bubbles, place it under a medium-pressure mercury lamp or a medium-pressure mercury lamp for a few seconds to position it, remove excess glue around it, and continue to illuminate it for ~ seconds to reach the maximum intensity.
4. Packaging, storage and transportation
This product is packed in black plastic bottles, external cartons, bottles or bottles per carton.
. This product should be stored in a cool place away from light and stored and transported as non-flammable.
5. Other instructions:
This product is an anaerobic series product. The viscosity, bonding strength, hardness, curing speed and color can be adjusted according to customer requirements.
The bonding quality and curing speed will vary depending on the wavelength, intensity, irradiation distance, irradiation time, material of the adherend and transmittance of the adherend of the ultraviolet light source. Relevant experiments should be done before use.
. This product may cause slight irritation to the skin. If it accidentally splashes into your eyes or skin, rinse immediately with water.
WhatsApp
