Year1
- 型号：
- TNU6250
- 规格：
- 250g/瓶
- 包装：
- 12瓶/箱
..Glue
1. Product applicable objects:
This product is mainly used for acrylic bonding , the bonding of acrylic to glass and the bonding of acrylic to metal can be cured by sunlight or ultraviolet light with a wavelength of ~ to accelerate the curing and bonding. The more commonly used ones are the bonding of acrylic nameplates, the bonding of acrylic photo frames, the bonding of acrylic handicrafts and jewelry, the bonding of D outdoor lamps and acrylic perspective mirrors, etc. In addition, this product can also be used to bond other plastics to plastics, to glass, to metals, and other materials in the handicraft industry. The main plastics to be bonded include, B, B, B, B, and other thermoplastics.
2. Product features:
The product is extremely versatile. Plastics can be bonded to various materials, and acrylic can be bonded to various materials. The bonding effects are extremely remarkable.
, flexible formula, no internal stress cracking after curing. Compared with traditional quick-drying adhesive bonding, it has the advantages of resistance to environmental testing and good flexibility.
, resistant to high and low temperatures, excellent moisture resistance, long-term waterproof, no yellowing, no whitening.
, Fast curing speed, positioning in a few seconds, reaching maximum strength in one minute, greatly improving work efficiency.
3. Technical parameters:
Test items
Appearance of colorless transparent liquid
Viscosity.
Positioning time
Curing energy/
Acrylic viscosity Acrylic: Tensile strength＞
Acrylic bonded to glass: Tensile strength＞
Acrylic bonded to metal: Tensile strength＞
Hardening (Shao)＞
High transparency after curing
4. How to use:
Before dispensing glue, be sure to clean the material to be glued and make its surface dry and clean.
After completing the first step, pour the glue evenly onto one of the adhered materials. Place the other material gently on the glue to fit it together. Please squeeze hard to expel air bubbles and make the glue flow level. Make sure that the bonding parts are covered with glue and then fix the position.
Use a cloth or paper towel to wipe away the excess glue spilled around the material. Try not to expose the glue to UV rays before this step. Do not use wet cloth, wet paper, or liquid (such as glass water, water, alcohol and other solvents) to clean the glue overflow around the material before the glue is completely cured.
, irradiate with ultraviolet lamp with a wavelength of ~nm until the glue layer has been fully cured. When irradiating, keep the UV lamp as close to the glue as possible to speed up the curing speed.
, after ultraviolet irradiation and curing. If there is still glue overflow around the plastic, you can use a blade to scrape it off.
5. Notes:
The ideal adhesive layer thickness when bonding is..., too thin or too thick will affect the bonding performance.
Make sure that the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the bonding performance of the adhesive layer.
Do not move the material back and forth when exposed to ultraviolet rays, otherwise it will easily cause the glue layer to turn white and the bonding strength to decrease.
. Remaining glue cannot be returned to the original packaging. It should be sealed and stored at room temperature away from light and kept out of reach of children.
6. Packaging and storage: Store in a cool and ventilated place indoors. The glue must be sealed. The ideal storage temperature is ℃. The expiration date is 1 year. The packaging is available in grams/bottle and kilogram/bottle.
WhatsApp
