Year1
- 型号：
- TN6223
- 规格：
- 250g/瓶
- 包装：
- 12瓶/箱
Plastic adhesive/is a one-component plastic bonding UV curing adhesive. Product features
General-purpose product has a wide range of applications, plastics and various The bonding of all materials has excellent bonding effect
, high bonding strength, and the damage test can achieve the rupture effect of the plastic body
. Flexible formula, no internal stress cracking will occur after curing. Excellent resistance to low temperature, high temperature and high humidity
, fast curing speed, positioning in a few seconds, reaching maximum strength in one minute, greatly improving work efficiency
, completely transparent after curing, the product will not yellow for a long time , no whitening
Compared with traditional instant adhesive bonding, it has the advantages of resistance to ring testing, no whitening, good flexibility, etc.
It can be applied through automatic mechanical dispensing or screen printing, which is convenient to operate.
2. Typical uses
Widely used in the bonding of plastics and plastics, plastics and glass, plastics and metals, plastics and other materials. It is mainly aimed at the self-adhesion and mutual adhesion of plastics in the handicraft industry. The main plastics to be bonded are: MM (acrylic, plexiglass), B, B, B, and other thermoplastic plastics.
3. Technical indicators
/
Project technical indicators
Before curing:
Appearance of transparent liquid
Viscosity ℃m./
Density (/ m).
Curing energy (m/m)
After curing:
Acrylic to acrylic shear strength (m)
Acrylic to acrylic tensile strength (m)
Shear strength of acrylic to glass (m)
Shear tensile strength of acrylic to glass (m)
Elongation at break (%)
Peel strength of acrylic to acrylic.
Hardness ( Shao D)
Note: The viscosity can be adjusted according to the customer's cured product performance indicators and tested with lamp curing m.
5. Instructions for use
. Perform general cleaning and drying of the working surface to be glued
. Squeeze the glue onto the cleaned substrate surface to make it evenly distributed. Close the two planes and irradiate them with an ultraviolet lamp of wavelength m to confirm that the ultraviolet rays can penetrate to the bonded part. The curing time is times the fixing time under the same ultraviolet light intensity to ensure that the adhesive is completely cured.
.The curing speed of this product depends on the intensity of ultraviolet rays, the distance between the light source and the adhesive layer, the required curing depth or the gap between the adhesive layers, and the light transmittance of the substrate.
.The unused glue should be tightly capped immediately and sealed for storage. This product is sensitive to UV rays. During storage and operation, exposure to sunlight, ultraviolet rays and artificial light sources should be avoided as much as possible. This product should be applied with a dispensing machine with a black feed tube.
． For complete curing of surfaces exposed to air, a relatively high UV light intensity of minimum m/or wavelength of UV light is required.
Glue/>
WhatsApp
