Year1
- 规格：
- 公斤
- 包装：
- 罐装
< Thomas High-Strength Structural Adhesive ()
< Overview
< This product is an epoxy resin double-modified structural adhesive, two-component, cured at room temperature or heated, the product is high-gloss, Tough, resistant to hot and cold shock, wide range of applications and easy to use.
< Scope of application
< Suitable for self-adhesive and mutual adhesion of PVC board/skin, polystyrene, aramid, B, silicone rubber, polyurethane, silicone fluorine rubber and other plastics. It can also be used for Bonding of plastic to metal, stone, wood, etc.
< Properties
Performance
Features
Points
< Appearance: The components are multi-colored viscous liquids. Component B is a colorless watery liquid.
Cure: At ℃, it will initially cure and then reach maximum strength. Such as heating and curing: ℃ hours, ℃,. hours.
High bonding strength, good toughness, durability and UV resistance.
Excellent media resistance, resistant to oil, water, acid, alkali and alcoholic organic solvents.
It has good storage stability and the storage period at room temperature is one year.
Safety and toxicity characteristics: It has a slight odor, no inhalation hazard, and the glue is actually non-toxic after curing.
The main technical performance indicators are as follows:
Temperature resistance range: ℃ + ℃ (/.galvanized sheet) material damage
Bonding strength: room temperature peel strength/shear strength.
, fully mix glue B according to the mass ratio:
. Apply the adjusted glue evenly to the two bonded surfaces, close them together and apply appropriate pressure to compact them, and let them stand at room temperature to solidify or heat them to solidify.
< Notes
< , Adjust the amount of B glue to change the curing speed. Adjust B glue within the range of: If there is more B glue, the curing speed will be accelerated, otherwise it will slow down.
. Temperature has an impact on the curing speed. Generally, when the temperature is high, the curing speed will be accelerated. When the temperature is low, the curing speed will be slowed down.
The adjusted glue solution is suitable for a period of time at ℃, so the amount of glue adjusted at one time can reach more than one kilogram.
, bonding polyethylene, aramid, polypropylene, polytetrafluoroethylene, silicone rubber, polyurethane and other difficult-to-bond materials, the bonding surface needs special treatment, the specific method will be processed in each batch of shipments and detailed instructions.
Do not mix the glue-removing tools. If the glue touches the skin, wash it off immediately with soapy water.
Pay attention to ventilation at the operation site. This product should be stored in a cool and ventilated place.
WhatsApp
