Year1
- 规格：
- 公斤
- 包装：
- 罐装
Thomas High Temperature Conductive Adhesive
< Overview
This product is a modified epoxy resin adhesive, one component , rapid curing by heating, excellent electrical and mechanical properties, good heat resistance and conductivity, good chemical stability and corona resistance, high bonding strength, and easy operation.
This product is widely used on many electrical components and components such as large integrated circuits, detectors, sensors, photosensitive components, instrument waveguides, or between dissimilar materials. Conductive connection, also suitable for the connector connection of the power supply system of the TV, radio, semiconductor radio, and the conductive connection of the electronic watch chip
< Performance
Performance
Features
Dots
Appearance: One-component light black viscous paste (color can be adjusted), no solid mechanical particles.
< > Curing Temperature
> Curing Time
> Curing Temperature
> Curing Time
< br/> < > ℃
>
> ℃
>
< > ℃< br/>
>
> ℃
>
Weather resistance, durability and UV resistance are excellent.
High bonding strength, good electrical and mechanical properties,
Heat resistance and excellent thermal conductivity, excellent chemical stability and corona resistance.
It can adapt to a wide temperature range and still has good bonding effect at higher temperatures after bonding.
The bonding surface does not require strict treatment and is easy to use.
Excellent media resistance, resistant to oil, water, acid, kerosene, ethanol, alkali, etc.
Safety and toxicity characteristics: It fully complies with European and American quality standards and reaches R certification.
The storage stability is good, and the storage period is several months. (℃)
The main technical performance indicators are as follows: Hardness r
Temperature range: +℃ Resistivity℃
Withstand voltage/㎡
Bonding strength: (+) Normal temperature: Pull Tensile strength, shear strength
℃: Tensile strength ℃
Remove rust and decontamination from the adherend Wipe clean.
Apply the prepared glue to the surface of the adherend, close it, compact it and let it stand for heating.
< Note
Matters
Pay attention to ventilation in the operating environment.
If the glue touches the skin, rinse it with soapy water immediately
Unused glue should be covered and placed in a cool and ventilated place. It would be better if there is refrigeration.
WhatsApp
