Year1
- 规格：
- 公斤
- 包装：
- 罐装
< Thomas High Temperature Resistant Adhesive (+)
< Overview
< This product is an epoxy resin modified adhesive, two-component, fast curing at room temperature, high bonding strength, and resistant to Excellent warmth and easy to operate.
< Scope of application
< Suitable for self-adhesion and mutual adhesion of metals, ceramics, and composite materials working under high temperature conditions. It is also suitable for leakage of various containers, cylinder cracks, and casting bonding. Filling, sealing, plugging and repairing, as well as bonding and sealing of heating parts of electrical appliances and instruments.
Performance
Features
Points
< Appearance: Components are light-colored viscous liquid, no Solid particles. Component B is a light yellow liquid.
The curing speed is fast. At ℃, it will start to cure in an hour and approach the maximum bonding strength in an hour.
High bonding strength, durability and excellent UV resistance.
It has good temperature resistance and can adapt to a wide temperature range. It still has good bonding effect at higher temperatures after bonding.
The bonding surface does not need strict treatment, and the two components are prepared in proportion, making it easy to use.
Excellent media resistance, resistant to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbons, nuclear radiation, etc.
Safety and toxicity characteristics: It has a very slight odor, no inhalation hazard, and is actually non-toxic after curing.
The storage stability is good and the storage period is years.
The main technical performance indicators are as follows:
Temperature resistance range: +℃
Bonding strength: normal temperature: tensile strength shear strength
℃: tensile strength
< Usage
Method
< , remove rust from the adherend, wipe the surface clean with wiping agent and let it air dry, wait until it is coated with glue
, press component B:.. The proportions are fully mixed. Sand the gap and the surrounding centimeter width with sandpaper, then apply glue with the gap as the center and smooth it toward the edge.
. Apply the prepared glue to the surface of the adherend, close it, compact it, and let it sit for ~ an hour.
< Note
Matters
< Never mix the glue-removing tools.
Pay attention to ventilation in the operating environment.
If the glue touches the skin, rinse it with soapy water in time.
Unused glue should be covered and placed in a cool and ventilated place.
WhatsApp
