Year1
- 规格：
- 公斤
- 包装：
- 罐装
Thomas Modified Resin Thermal Cycle High Temperature Resistant Adhesive
< Overview
This series of resin modified adhesive The adhesive is curable at room temperature. Its fluidity can be adjusted appropriately. After curing, it has excellent high temperature resistance and high and low temperature cycle performance.
This product is widely used in sealing surface coating and bonding of cermet sensors, thermocouples, semiconductor transformers, filters, etc. and in hot and cold applications that require good Cyclic alternating performance.
Performance
Features
Points
Appearance : The component is a black viscous liquid with no solid particles. Component B is a colorless mixed viscous liquid.
The curing speed is fast. At ℃, it will start to cure in an hour and reach the maximum bonding strength in an hour.
High bonding strength, good toughness, good durability, excellent medium resistance, oil, water, acid, kerosene, ethanol, alkali, etc.
It has good temperature resistance and still has good bonding effect at higher temperatures after bonding.
The glue has moderate viscosity, no bubbles and good leveling performance, and the surface finish is good after curing.
Safety and toxicity characteristics: It has a very slight odor, no inhalation hazard, and is actually non-toxic after curing.
The storage stability is good, and the storage period is several months.
The main technical performance indicators are as follows: Cyclic temperature range: +℃ Shore hardness Shear strength ℃ Peel strength / thermal expansion coefficient Thermal conductivity Water absorption ℃%%
< Use Method
Remove rust, decontamination and wipe clean the adherend.
Mix component B thoroughly according to the proportion of:
Apply the prepared glue to the surface of the adherend, close it and compact it and let it stand or put it into the oven for heating at ℃ for an hour.
Use life (/°C)
< Precautions
Never mix the glue tools.
Pay attention to ventilation in the operating environment.
If the glue touches the skin, rinse it with soapy water immediately
Unused glue should be covered and placed in a cool and ventilated place.
WhatsApp
