Dexing City, a professional manufacturer of modified epoxy resin infusion glue

Pouring glue to bond steel
Product introduction
Contact Manager Ma’s phone number
Pouring glue is a two-component epoxy resin structural adhesive, which is suitable for fixing first and then pouring to glue steel. Special glue type, mainly used for pouring construction that requires high-strength bonding surfaces.
Paste the processed steel plate on the surface of the concrete component that needs to be reinforced, so that the steel plate and the concrete structure form a whole to bear the force together.
Scope of application
Wet outsourcing steel plate reinforcement for concrete components, large-area steel plate pouring and bonding steel reinforcement for bridges and other components
Grouting repair of honeycomb holes for internal defects in concrete cracks
Glue ratio
Component glue proportion
Operation process
Key points of wet-type wrapped steel plate reinforcement construction
Drill fixed holes in the steel plate, drill glue injection holes in the concrete components, drill concrete and steel plate surface treatment at corresponding positions, fix the steel plate and set glue injection holes Prepare sealing glue for the exhaust hole. Use sealing glue to seal the periphery of the pasted steel plate and the gap in the bolt hole. Wait for the sealing glue to solidify. Stir the components thoroughly to prepare the pouring glue. Inject the glue components according to sufficient mixing pressure and solidify. Quality inspection. Steel plate surface anti-corrosion treatment
Technical parameters
Physical
Performance
Appearance
Components
Viscous liquid
Components
Viscous liquid
Viscosity< br/> Components

Components

Strength
Learning
Properties
Energy
Cohesive Compressive Strength
/> ℃ days

Cohesive tensile strength
℃

Steel-steel bonding shear strength
℃

Steel-steel bond tensile strength
℃

Steel-concrete shear strength
℃
Concrete failure
Durability
Performance
Tensile strength of steel concrete
℃
Concrete damage
Artificial aging shear strength

Strength reduction<
Precautions
The construction environment should be ventilated and dry , the pasting surface is clean and free of oil
The curing temperature should not be lower than ℃, the curing time should not be less than days when the ambient temperature is ℃, and the curing time should not be less than days when the average temperature is ℃
Gloves and masks must be worn during construction Protective equipment such as eyepieces and safety helmets
If it accidentally gets on the skin or clothing, it can be washed and rinsed with plenty of water
If accidentally eaten or splashed into the eyes, seek medical attention immediately
Packaging specifications
This product is packaged in large and small barrels. Large barrels are components, and small barrels are components/groups, components, components.
Transportation and Storage
This product is non-toxic and non-dangerous. It is transported as general chemical building materials. It must not be exposed to the sun, rain, inversion or damage to the packaging during transportation.
The two components should be stored separately to avoid mixing
This product should be stored in a cool, dry warehouse away from light, with a storage period of one month