Stainless steel high efficiency oil removal filter

Introduction to stainless steel compressed air filter
Product description:
Sanitary gas filter
Gas filter is used for compressed air, nitrogen, carbon dioxide, helium, neon, argon, steam, etc. Purification and sterilization of various gases are divided into pre-filters, coarse filters, fine filters, etc. according to their functions. Sterile air filtration for biological fermentation engineering. : The gas flow specifications are: : The filter inlet and outlet are connected by standard flanges. The filter material has a reasonable structure, beautiful appearance, and internal and external polishing that meets the requirements of the electronics and other industries. : The filter materials are polytetrafluoroethylene, glass fiber composite felt, titanium alloy, polypropylene and other series of microporous products: the filter is also equipped with a differential pressure gauge, safety valve, and drain valve
Product Definition
The compressed air precision filter is used to remove contaminants in the compressed air system such as dust, iron filings, scale and other corrosive solid particles, compressor lubricant condensation drops and acid-cooling condensate, as well as oil and hydrocarbon mist, etc. Provides compressor air systems with high-quality compressed air that meets application requirements.
Main components: filter element, filter shell, end cover, tooth bar, etc.
The material of the filter is generally selected to be the same as the material of the connected process pipeline. For different service conditions, cast iron, carbon steel, low-temperature steel, etc. can be considered. Filter made of alloy steel or stainless steel.
Product Features
Highly efficient removal of water, oil mist, and solid particles. The concentration of particles and oil mist is controlled to be within ./
. Reasonable structure, small size, and light weight
, plastic shell with protective cover and aluminum alloy shell are optional.
, segmented purification treatment and long service life
In order to achieve high precision filtration quality, the compressed air precision filter uses multiple layers of different filter materials, including borosilicate fiber layer, glass fiber layer, Activated carbon fiber layer, multi-layer non-woven layer and stainless steel mesh layer. Only in this way can high-quality air without oil and impurities be achieved.
Principles of filter selection
Inlet and outlet diameter: In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipeline.
Working pressure: Determine the pressure level of the filter according to the highest possible pressure in the filter pipeline.
Filtration level: The main consideration is that the particle size of impurities to be intercepted is determined according to the process requirements of the media process. Check the filter specifications in the table below for the particle sizes that wire mesh of various specifications can intercept.
. Air handling capacity: According to the maximum air handling capacity at working pressure.-.
. Filter material: The material of the filter is generally selected to be the same as the material of the connected process pipeline. For different service conditions, filters made of cast iron, carbon steel, low alloy steel or stainless steel can be considered.
Filter name
Stainless steel oil-water separation filter Stainless steel main pipe filter Stainless steel air pipe filter Stainless steel air pipe filter Stainless steel dust filter Stainless steel dust fine filter Stainless steel dust filter Stainless steel oil mist filter Stainless steel Ultra-high efficiency oil removal filter Stainless steel high efficiency ultra-fine filter Stainless steel high efficiency oil removal filter Stainless steel micro oil mist filter Stainless steel activated carbon filter Stainless steel steam filter Stainless steel deodorization filter Stainless steel activated carbon deodorization filter Stainless steel oil vapor filter Stainless steel activated carbon Micro oil mist filter
Precision filter element fine classification
The main pipeline filter can remove a large amount of liquid and above solid particles to achieve the lowest residual oil content with only a small amount of moisture, dust and oil mist. It is used after the rear cooler of the air compressor and before other filters for general protection. It is used as a pre-treatment device before the cold dryer.
The air pipeline filter can filter out the smallest liquid and solid particles to the lowest residual oil content, with only trace amounts of moisture, dust and oil mist. It is used for pre-treatment before the stage filter and after the cold dryer and suction dryer to further improve the air quality.
The ultra-high-efficiency oil removal filter can filter out liquid and solid particles as small as . It is used for protection before stage filtration and suction dryer and after cold dryer to ensure that there is no oil in the air.
The activated carbon filter can filter out oil mist and hydrocarbons as small as . It plays the last filtration role for some units that must use high-quality air, such as food industry, breathing, aseptic packaging, etc.
Welcome to call us for detailed information on sterilizing filters and sterilizing filters!
Unit: Hangzhou Jialu Purification Technology Co., Ltd.
Address: Shida Road, Jianggan District, Hangzhou City - No. Postal code:
Person in charge: Zhu Xiaoping Tel: - True fax: - Machine Hand:
Email:@.
Quality assurance, price concessions, integrity, at least welcome all friends to consult and negotiate.