(ZPG) Horizontal straight-through decontamination device, horizontal angle-through decontamination device

『Product Description』 Horizontal straight-through sewage separators and horizontal angle-through sewage separators are mainly composed of filters, steering valves, cylinders, and sewage discharge devices. The water to be treated enters the filter body through the water inlet. When the separator is working, the steering valve is open. The medium enters the separator and passes through the outlet. When the separator needs to discharge waste, the steering valve is closed. The medium is also filtered by the filter and passes around the valve plate. The gap changes the flow direction and reverses the flow through the filter to open the drain valve to remove impurities. The whole process is in non-stop motion.
『Design Features』
The filter can work normally at full flow rate and continuously discharge water, maintaining high flow rate and low pressure drop to avoid surface stains caused by low flow rate
, directly installed on the pipe network system without any support structure to save space
, easy to install, just need to be connected to the pipeline of the system to be treated
, no need to install a bypass pipe to dismantle the sewage discharge
/> , normal filtration will not be affected during cleaning
『Application fields』
Installed on pipelines, it can remove larger solid impurities in the fluid so that machinery and equipment (including compressors, pumps, etc.) and instruments can work normally and operation to achieve the role of stabilizing the process and ensuring safe production.
『Please inform us when ordering』
Caliber d temperature d pressure d medium d filtration accuracy d connection method d material d flow and other parameters so that we can provide more accurate services.
『Corporate Philosophy』
Market the world with brand, create the future with technology, and win customers with service. Our goal
『General principles for filter selection』
, Inlet and outlet diameter:
In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipeline.
, Nominal pressure:
Determine the pressure level of the filter according to the highest possible pressure in the filter pipeline.
Selection of the number of holes:
The main consideration is that the particle size of the impurities to be intercepted is determined according to the process requirements of the media process. Check the filter specifications in the table below for the particle sizes that wire mesh of various specifications can intercept.