(ZQLG, RGL) axial flow filter

"Product Description" (, r) Axial flow filters are usually divided into three types: angle type, axial type, and differential pressure type. The prototype is based on the axial flow guide vane hydrocyclone. Some of the barrel sections and cone sections are made of filter media. production. The experiment found that the axial flow filter has a larger processing capacity when the separation efficiency does not change much. The optimal combination is a small cone angle with a short barrel section. The influence of the pore size of the filter medium on the separation performance was summarized.
『Design Features』
Large filtration area, low resistance, safe and reliable, easy installation and maintenance, large dust accumulation capacity, and can be designed into two structures: straight-through shaft type and angle shaft type according to needs
『Application Area』
Axial flow gas filter is an important equipment in the gas distribution system. During the gas transmission and distribution process, it can remove solid impurities in the gas to ensure the normal operation of the pressure regulating equipment and other gas equipment.
『Please inform us when ordering』
Parameters such as diameter, temperature, pressure, media filtration accuracy, connection method, material flow rate, etc. will allow us to provide more accurate services.
『Corporate Philosophy』
Market the world with brand, create the future with technology, and win customers with service. Our goal
『General principles for filter selection』
, Inlet and outlet diameter:
In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipeline.
, Nominal pressure:
Determine the pressure level of the filter according to the highest possible pressure in the filter pipeline.
Selection of the number of holes:
The main consideration is that the particle size of the impurities to be intercepted is determined according to the process requirements of the media process. Check the filter specifications in the table below for the particle sizes that wire mesh of various specifications can intercept.