(SKP24) Manual flush filter

『Product Description』 The manual flushing filter is a basket-type structure. The main components are composed of a cylinder, a stainless steel wedge-shaped filter screen, a water flow guide valve and a sewage discharge device. When the filter is working, the water flow guide valve is open. The water flow enters the filter from the inlet and is filtered. Net to export. When the filter needs to be drained, close the water flow guide valve and open the drain valve. The water flows through the filter and flows into the inside. Part of the water flow flows from the outlet into the system. The remaining water flow flows from the outside of the second half of the filter to the inside and is discharged through the drain outlet, which plays the role of reverse automatic flushing of the filter. . In this way, the entire flushing process system can run normally without shutting down.
『Design Features』
The main function of the manual backwash filter is to reduce dirt and ensure the operation of the entire system. In particular, the non-stop system that runs continuously for hours can filter out various mechanical impurities in the water to ensure the system Safe and reliable operation of equipment.
『Application fields』
Manual backwash filter is mainly used to filter impurities and particulate matter, purify water quality and reduce water turbidity. It is suitable for various water supply systems, process water systems and industrial cooling water systems.
『Please inform us when ordering』
Parameters such as diameter, temperature, pressure, media filtration accuracy, connection method, material flow rate, etc. will allow us to provide more accurate services.
『Corporate Philosophy』
Market the world with brand, create the future with technology, and win customers with service. Our goal
『General principles for filter selection』
, Inlet and outlet diameter:
In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the diameter of the inlet pipeline.
, Nominal pressure:
Determine the pressure level of the filter according to the highest possible pressure in the filter pipeline.
Selection of the number of holes:
The main consideration is that the particle size of the impurities to be intercepted is determined according to the process requirements of the media process. Check the filter specifications in the table below for the particle sizes that wire mesh of various specifications can intercept.