Xinxiang Supply-High Solid Content Oil Filter

& Two-stage high solid content oil filter High solid content oil filter High solid content oil filter performance detailed description: When the oil filter is working, the contaminated oil enters the heater through the inlet under the action of vacuum suction by the external atmospheric pressure, and is heated The final oil enters the primary filter, where large impurities are filtered out, and then the oil enters the water separator and vacuum separator, and flows through a special dispersion device. The divergent device creates a huge surface area per unit volume of oil, exposing the contaminated oil to a vacuum with very low relative humidity, thereby removing water, air and gas from the oil. The mixed gas formed by the evaporated water vapor and gas is condensed into liquid through the water tank and cooler, and enters the water storage together. The remaining gas is pumped out by the vacuum pump. The oil from which water has been removed is fed into the fine filter by the oil drain pump to remove particulate impurities, which is purified oil. A purification process is completed. Depending on the water content, multiple cycles are required to completely remove the water.
Application
>●Clarification and filtration of food oil
>●Regeneration filtration of waste oil
>Using special filter material as the filter element, its filter layer is thick and is a general filter material ~ times, with high filtration efficiency and can effectively remove suspended solids, particles, rust, etc. in the liquid.
>, the filter pore diameter is large on the outside and small on the inside, with excellent deep filtration effect.
>Scientific design, compact structure, can withstand high filtration pressure.
>The unique deep mesh structure gives it an extremely high dirt-holding capacity.
>The filter element has a single component, stable chemical properties, and good compatibility with the media.
>Technical Features
>Edit
>Use special filter material as the filter element. Its filter layer is thick, ~ times that of ordinary filter materials. It has high filtration efficiency and can effectively remove liquids. suspended solids, particles, rust, etc.
>, Adopting a gradient air diameter structure, the filter pore diameter is large on the outside and small on the inside, with a deep filtration effect.
>Scientific design and compact structure can withstand high filtration pressure.
>, Unique deep mesh structure, with extremely high dirt holding capacity.
>The filter element has a single component, stable chemical properties, and good compatibility with the media.
>Introduction to technical parameters
>Edit
Model
C
C
C




Rated pressure
c= .
Original pressure loss
c= &.
Fine filtration accuracy
c=
Motor Power
.
.
.
Voltage
c= Three Phase
Weight



Overall dimensions
&#

&#

&#