Xinxiang Supply-Box-type explosion-proof high-precision stainless steel oil filter

& Box-type oil purifier C box-type explosion-proof high-precision stainless steel oil filter is a filtration product independently researched, developed and produced by our factory. It is suitable for oil purification and processing of hydraulic systems, lubrication systems and static pressure systems in various industries. Inject new oil and can also be used for low-pressure system cleaning. It is especially used for filtering and filling oil in hydraulic stations in power plants and steel plants. The pipes and filters of this model are made of high-quality stainless steel, and the sealing material is fluorine rubber. It is suitable for high-precision filtration of water glycol. The filter material adopts American gradient filter material, which has high filtration precision and large dirt holding capacity. Use explosion-proof motors and explosion-proof magnetic starters to prevent motor ignition and motor overheating and burnout, ensuring safe operation. 1. Technical parameters:
&Rated flow:/
&Rated pressure:.
&Filter accuracy:
&Motor power:.
&Rated voltage:
2. Precautions:
First take out the three-phase four-core wire from the distribution box, connect the three-phase power supply, and connect the ground wire. Press the start button and see if the steering rotates clockwise. If it rotates counterclockwise, please turn the three-phase power cord around. Make sure the motor is running in the forward direction.
.Connect the inlet and outlet oil pipes to the inlet and outlet ports, open the inlet and outlet ball valves, and check whether there is leakage in the connecting oil pipes and whether the connection is reliable.
.Press the green start button to start the oil filter.
. Please press the red button to stop the machine. Please remove the power cord when not in use.
.When the pressure behind the pump is greater than ., please pay attention to replace the fine filter element.
The filter element of the oil suction primary filter can be cleaned and reused. When cleaning, soak in gasoline or kerosene and scrub with a brush.
After cleaning and replacing the filter element, please pay attention to connect the filter upper cover to prevent oil leakage.