DB737 high temperature repair agent

1. Product introduction: This product is a two-component product. The main material is a polymer repair material made of modified epoxy, ceramics, and metal. It has good high-temperature sealing performance and wear resistance. The working temperature is ~℃.
Two application areas
Suitable for repairing wear, scratches and corrosion of equipment under high temperature conditions, such as steam pipes, hot oil pipes, engine blocks, papermaking drying cylinders, plastic molding abrasives, etc.
Three usage methods
Design and process the bonding and sealing joint surface.
Roughen the surface to be bonded and remove rust and dirt.
When preparing glue, weigh the two components of solid and liquid in proportion, mix and mix thoroughly to form a flowable paste, and use it after each glue mixing.
Gluing and curing: Apply or pour the mixed glue to the parts to be bonded and sealed, and pressurize to solidify.
Four Curing Procedures
Weigh the two components according to the solid-liquid weight ratio and mix them evenly.
Apply the mixed glue to the parts to be bonded for bonding.
After gluing, place it at room temperature for an hour.
Then heat to ℃~℃ and keep at constant temperature for 1 hour.
Finally, cool slowly.
Five product properties
Product indicators
Name

Color

Heat-resistant temperature
℃

Density

Compressive strength
Shear strength
Flexural strength

High temperature repair agent

Gray

~