Resistance type level meter

Resistance type level meter
Product introduction
When the detection plate is blocked, the main shaft is blocked and stops, and the motor continues to run, causing the release to trip, causing the micro switch to cut off the motor power. The motor stops working and sends out a level signal.
Product details
1. Overview and application:
When the detection board is blocked, the spindle is blocked and stops, and the motor continues to run, causing the release to trip, causing the micro switch to cut off the motor power. , the motor stops working and sends out the material level signal.
When the material level drops, the resistance of the detection plate disappears, the motor resumes work, sends out a material level signal, and the instrument is in the detection state again.
Used for: Alarm and control of material levels in metallurgy, chemical industry, petroleum, electric power, food, papermaking, coal, building materials, medicine and other fields
2. Product features:
Open silo Detect, alarm and control powdery, granular and block materials in closed silos
Mechanical instrument with simple structure and high temperature resistance
No complicated electrical circuits, accurate detection and reliable control
Dust-proof and impact-resistant
Can work for a long time and operate reliably
3. Technical parameters
Model ---
Power supply
Power supply
,,,< br/> Power consumption
Ambient temperature
-～℃
Ambient temperature
Medium temperature
℃℃
℃
℃ ℃
Action frequency
times/minute
times/minute
times/minute
times/minute
Working delay~
Second 3~
Seconds~
Seconds~
Seconds
Detection plate swing angle
+
+
+
Working pressure

Normal pressure


Measuring height
Fixed point installation/position decision
Fixed point installation/position decision
Fixed point installation/position decision
Media particle size
Media density./

./
Structural features
Rubber seal
Suitable for large silo measurement
Bellows fully sealed
Rubber seal
Flange outer diameter
￠
￠
￠
Flange hole diameter
￠
￠￠
Ordering Instructions
Indicate the model, and indicate conventional type or relay output
Indicate the installation method
Indicate the name of the measured medium, medium density, and medium particle size.
Indicate the silo pressure, temperature and silo particle size
Indicate the silo pressure, temperature and silo height
For -, - type instruments, the user should provide the length of the detection rod (flange to the end of the detection board), and indicate whether a protective cover is needed