Coal-fired heating fully automatic frying line French fries twist frying processing equipment

型号：

KSMX3500

功率（kw）：

6

外形尺寸：

3500*1200*2000

1. The external heating coal-fired fryer has the characteristics of using less oil and heating up faster. Use 3 cubic meters of cooking oil in the fryer and 3 cubic meters of cooking oil in the external heater. The working principle is as follows: Two high-temperature-resistant circulating pumps are used alternately to transport the edible oil in the frying pan to a box-type multi-layer filter. The filtered edible oil is transported through the filter to a coal-fired external heater for heating. The external heater The heated cooking oil returns to the fryer through the large-diameter oil return pipe, and is heated in this way. The heating time is 3 minutes. The feed end is a stainless steel plate and belt, the material is pressed with a stainless steel B-type belt, and the discharge is made of stainless steel winding. Wire mesh belt, a length of flat swing plate belt is set at the feeding end to facilitate the operator to place semi-finished products. The frying time is frequency controlled and adjustable in 3 seconds. The frying temperature can be set at normal temperature and ℃. This equipment has There is a lifting device, which can lift the mesh belt and the hood at the same time or separately to facilitate the sanitary cleaning of the equipment. After frying, it enters the draining cooler. The draining cooler is equipped with a high-power axial flow fan and uses wire winding. Mesh belt conveyor has good ventilation performance and is convenient for cooling. The bottom of the equipment is equipped with an oil receiving tank to collect the residual oil of fried products. It is clean and hygienic and can be used again.